Showing posts with label Solutions. Show all posts
Showing posts with label Solutions. Show all posts

Automation and Mechanization - The Most Effective Solutions for Work-Related Injury to the Shoulder

Work-related injury occurs in almost every job. Finding and correcting the ergonomic problems that cause musculoskeletal disorders (MSDs) involves managing MSD hazard controls. These are engineering, work practice, and administrative controls. The latter two are about behavior and the way work is performed. While these tend to be the least costly solutions, they cannot be effective alone. Engineering controls, or those that physically change the work station or job task, are the most preferred way to prevent MSDs in the work place. This is because they don't rely on the employee to take self-protective action or intervention. In fact, they create a safer environment as a whole. In some fields, engineering controls are more about tools and workstations than they are changing a process or implementing new equipment. These are less costly scenarios. However, the more debilitating the potential MSDs, the more elaborate a change a company may need to make. These solutions can be a significant investment, but in the long run, they pay for themselves. Let's examine engineering controls as they relate to shoulder injuries.

The shoulder is the most moveable joint in the body and is used in a lot of the same tasks that place stress on the back, legs, arms, and neck. Common work-related MSDs in the shoulder include: tendonitis, bursitis, frozen shoulder, degenerative joint disease, impingement syndrome, and arthritis. Treatment for these can be extensive and costly depending on severity. In many cases, employees cannot return to the same job while recovering from shoulder injury, and sometimes they are permanently unable to return to the field. This is devastating not only to the affected employees, but also employers. There are too many specific automated devices in existence to list individually, but we can look at some broad solutions to the overworked shoulder.

Reducing overhead work: mechanized and automated equipment that can adjust to the height of the person using it significantly minimizes the need to reach. This may be a stationary unit that moves up and down or part of a pulley system that also transports product. In some cases, an overhead crane or lifting system is appropriate to eliminate any manual movement of an object. Reaching is a major factor in work-related shoulder MSDs.
Minimizing repetition: repetitive movements - great or small - severely impact the health of a joint. Anything that replaces the job of manual repetitive motion will be an asset to a company whether it's a conveyor belt or a dipping machine.
Pushing and pulling modifications: most people equate injuries from pushing or pulling with the back. While this is true, the shoulder is also used in pushing and pulling. Ideally, carts (and the like) are motorized to eliminate pushing and pulling all together. This is the safest solution for the entire body. For transportation equipment that isn't motorized, having handles that adjust to the pusher's height is very important. Carts can also be designed to be loaded and unloaded with minimal bending, lifting, and twisting. These actions are also very stressful to both the back and the shoulders.

While these are just three categories of improvement, the number of machines, equipment, and devices built with those factors in mind is enormous. They're built because they're not only needed, but they're also effective. Whatever your industry, there are products designed to help minimize undue stress and injury to your body.

Carol Olin is Vice President of Americarts USA, a manufacturer of US-made motorized platform carts used for hospital transporting, hospitality and industrial. AmeriCart USA features high quality carts price to compete with imported products. Carol has been in the material transport equipment industry for over 11 years.


Original article

Motorized Vs Manual Ergonomic Solutions

You've done your research on ergonomics. You've minimized lifting and carrying by implementing jacks, carts, and the like. The employees are definitely safer working at your site. Now you feel pressure to upgrade to motorized equipment. No matter what you do, your employees will have a physical job, and they know it when they apply. So does it matter whether your ergonomic solution cuts out that much physical work? Possibly.

Obviously, the less physical a job is, the safer it is, but completely automating a job site isn't always realistic. Depending on the job, the danger of physical harm caused by manual labor will vary. Factors include: frequency of the job task, other job responsibilities, breaks, effort required to use the tools or equipment, and body mechanics. It is important to remember that when researchers determined that pushing and pulling was safer than lifting and carrying, they didn't account for the new demands pushing and pulling placed on the body. Ultimately, pushing and pulling can create a new set of physical problems for employees. Knowing how employees are using tools and transportation devices is vital to making a decision about motorized equipment.

Frequency of job tasks and other responsibilities- what are your employees doing all day? Most work-related MSDs are the result of any one or a combination of movements like bending/twisting, awkward or static postures, vibration, heavy lifting, and pushing/pulling. The most dangerous element of manual material handling (in relation to MSDs) is repetitive movement. Do any of the above actions repeatedly, and a problem becomes very likely to arise. If the equipment in mind is a cart, and some effort is required to move the cart, ask whether this pushing/pulling task is done repeatedly throughout a shift. Are there other job duties that exacerbate the muscles or posture used to push and pull the cart? Are other job duties also strenuous enough to cause fatigue? If this cart is ultimately wearing your employee down, or eliminating manually operating a cart will significantly spare an employee of unnecessary strain, a motorized option may be for you.

Breaks and shift rotation- other job responsibilities overlaps here, too. If your employees are exposed to a lot of physical labor (or extreme heat, etc.,) frequent breaks will increase the longevity of one's career. The body is designed to be active, but it does require rest. Additionally, if there are many job tasks that vary in movement and effort needed to perform the task, can employees rotate stations? If employees are exposed to a number of activities that differ in physical demand, it may offer rest and relief from repetition. If employees can't take frequent breaks, can't rotate stations, or each station is placing similar physical demands on the body, then motorized equipment may be a sound investment.

Effort required and body mechanics- how strenuous is it to manually start, stop, and maneuver the equipment? Even if a heavy load is being carted around rather than carried, effort is still required to move the transportation vessel. Also, how aware are your employees of proper body mechanics when performing job duties? Are they able to manipulate tools and equipment safely? Adjustable handles and shelves along with safety training will go a ways. When that doesn't go far enough, motorized equipment may be the answer.

Ultimately, there are a range of ergonomic solutions for every job task. Some are as simple as rearranging height to workspace ratio. Some are as complex as automating the work station. The safest work environments pay attention not only to the equipment and layout, but also employee awareness of potential problems and safety issues. Regardless of how you manage ergonomic concerns, safety training and checking in with employees is a must.

This article assumes that ergonomics have already become a part of the job site to minimize work-related injury. If a manual material handling site is new to ergonomics and work related musculoskeletal disorders (MSDs), there are many more changes to consider than just motorized equipment. Consult resources or experts that deal with basic ergonomic solutions to create the safest environment for your employees.

Carol Olin is Vice President of Americarts USA, a manufacturer of low cost motorized carts and battery powered platform carts used for hospital transporting, hospitality and industrial. Americart USA features high quality carts price to compete with imported products. Carol has been in the material transport equipment industry for over 11 years.


Original article

Solutions for Potential Work-Related Neck Injuries

Many workplace injuries occur over time rather than in one event. While that might make it take longer to recognize the risks, it also gives companies a little time to fix the problems that cause injuries. With a little knowledge of what can help and why, preventative measures are both plausible and economical. One key factor of preventing injury, however, is identifying all the body parts that can be affected by repetitive and stressful movement. This article will look at solutions for potential neck injuries.

Work-related injuries to the neck can be hard to detect. One reason is that the neck is exposed to so much stress from daily activity that people learn to ignore neck pain. By the time the pain is severe enough to take notice, the injury may be significantly more difficult to treat. A bigger reason neck pain is difficult to detect is that pain in the neck can affect the shoulders, arms, and hands. In these cases, the body part where pain is felt may be addressed, leaving the actual source of pain untreated. This can lead to chronic pain. Some typical injuries and problems in the neck include: arthritis, strains, sprains, herniated discs, headaches, impinged nerves, shoulder-neck-strain-syndrome, tension neck syndrome, and tingling and numbness in the neck, shoulders, arms, or hands. Ideally, employers would solve injury-related problems before they occur. Here are some ergonomic engineering controls that can be managed to save the neck:

Create a proper working height. This includes not only adjusting the height of anything the employee looks at (using neck muscles to look up, down, etc), but also anything the employee has to reach for. The neck and shoulder are closely related. Adjustable chairs and a revamped desk are easy ways to help a person sit at a desk correctly. For more laborious work tasks, carts with adjustable handles (keeping elbows close to the body during transportation) will keep the neck and shoulders neutral. Carts that carry equipment and act as a workstation may also have adjustable components to ensure a proper work space for each user.
Reduce far reaching. Reaching can stress everything from the neck down through the back. Conveyors, racking, and anything with adjustable heights (ie: cart handles) will help minimize reaching. Be very careful that the workstation does not require reaching behind the body. If reaching also involves handling or carrying a heavy object, an automated solution may be best to eliminate both risk factors.
Reduce repetitive movements like neck bending and twisting. Any part of a workstation that can move with the employee to prevent a back-and-forth between tasks will help here. Additionally, ensuring the height of every repetitive task keeps the neck neutral can help. Depending on the job task, automating a repetitive task may be the safest and most productive option available. Bending and twisting the neck can also occur because of poor lighting. Reduce glare where possible.
Minimize static work postures. In addition to repetitive movement, no movement - especially in an awkward posture - can stress the neck as well. Here again, adjusting the height of tools and workstations, and implementing mechanization are very effective.
Minimize forceful exertions and heavy carrying. Whether a person is pushing and pulling, manipulating a tool, or carrying a heavy object, forceful exertions can be very detrimental to the body. Power tools with torque reduction or automatic shut-off, mechanized tasks, tools with clamps, and automated carts can all eliminate unnecessary exertion. Heavy objects should be transported by a cart, conveyor belt, or lift to reduce the chance of sprain or strain.

There are many more specific problems and solutions in the workforce, but some common ones were covered here. Saving the body from injury not only keeps the employee healthy and working, but saves the employer time, cost and production. Ergonomic solutions to reduce work-related injury are very effective, especially for the neck. Consult an expert to find the best solutions for you.

Carol Olin is Vice President of Americarts USA, a manufacturer of motorized carts such as platform carts used for hospitality and commercial industries. Americart USA features high quality carts price to compete with imported products. Carol has been in the material transport equipment industry for over 11 years and has written a number of articles relating to work place injuries.


Original article