Showing posts with label Injury. Show all posts
Showing posts with label Injury. Show all posts

Work and Shoulder Problems: Why the Shoulders Are at Risk of Injury on the Job

Depending on the job, every part of the body is at risk for work-related injury and dysfunction. Occupations that involve manual material handling and other physical labor obviously pose more risk to body damage than do desk jobs. However, when it comes to the neck and shoulder, whose functions are integrated into almost every work activity, the pool of jobs that can bring about pain is very large. Looking at the shoulder specifically, it can be difficult to connect pain to work tasks. The shoulder works so closely with the neck and arms that problems in the shoulders can show up as pain elsewhere. Since the shoulder is taxed during daily activities outside of work, it can be hard to miss the relationship between pain caused by the shoulder and work tasks. Extensive research has shown, however, that in cases of chronic pain and pain that limits activity, the relationship between work activity and shoulder symptoms are too strong to ignore. The shoulder is a versatile and complex joint that is easily affected by several activities. 

The shoulder is comprised of 4 separate boney and musculotendinous joints and has the greatest range of motion of all other joints in the body. Muscles acting on the shoulder go far beyond the rotator cuff muscles everyone is familiar with. In addition to moving the shoulder, muscles can be taxed by stabilizing the shoulder. Shoulder stabilization is necessary in a number of activities that can also include neck, arm, and back movement. The complexity of the shoulder joint and its relationship to the rest of the body can create some very frustrating diagnosis issues. Just as problems in the neck can be felt as pain elsewhere, shoulder stress can travel up the neck, down the arms, into the chest, and into the back depending on what part of the shoulder is affected. When a person "protects" a part of his body to minimize the pain, he may actually exacerbate the problem by demanding more damaging action at the source of pain in order to compensate for it. 

In a work setting, the most likely culprits for shoulder dysfunction are repetitive motion and static posture. In an exercise regimen, these forces on the shoulder (or anywhere) can build strength. This is true in the workplace, too, but the difference is after that exercise, the muscles are allowed to rest and often are stretched. Placing the arm at various angles and putting stress on the shoulder at work without allowing the joint to recover can lead to a variety of problems. Some of the most common issues involving the shoulder are: tendonitis, bursitis, frozen shoulder, impingement syndrome, degenerative joint disease, and arthritis. 

Any kind of pain is a signal from the body to stop or change activity. If work is placing too much stress on any part of the body, change needs to happen immediately. The longer pain is ignored and activity continues, the more debilitating an issue can become. This can lead to less efficient work, time loss, mistakes, and medical care - all costly and unwanted by any employee or employer. Minimizing the risk of injury can be accomplished with a number of ergonomic solutions. Some may be as simple as varying work tasks or incorporating more breaks. Others may involve changes to a work station or using a device to eliminate an activity. In any case, it benefits both the health of employees and business to identify possible threats to well-being and eliminate them.

Carol Olin is Vice President of Americarts USA, a manufacturer of material handling carts and platform carts. Americart USA can address your material transport needs with a low cost motorized cart that can be used in a variety of industries.


Original article

Automation and Mechanization - The Most Effective Solutions for Work-Related Injury to the Shoulder

Work-related injury occurs in almost every job. Finding and correcting the ergonomic problems that cause musculoskeletal disorders (MSDs) involves managing MSD hazard controls. These are engineering, work practice, and administrative controls. The latter two are about behavior and the way work is performed. While these tend to be the least costly solutions, they cannot be effective alone. Engineering controls, or those that physically change the work station or job task, are the most preferred way to prevent MSDs in the work place. This is because they don't rely on the employee to take self-protective action or intervention. In fact, they create a safer environment as a whole. In some fields, engineering controls are more about tools and workstations than they are changing a process or implementing new equipment. These are less costly scenarios. However, the more debilitating the potential MSDs, the more elaborate a change a company may need to make. These solutions can be a significant investment, but in the long run, they pay for themselves. Let's examine engineering controls as they relate to shoulder injuries.

The shoulder is the most moveable joint in the body and is used in a lot of the same tasks that place stress on the back, legs, arms, and neck. Common work-related MSDs in the shoulder include: tendonitis, bursitis, frozen shoulder, degenerative joint disease, impingement syndrome, and arthritis. Treatment for these can be extensive and costly depending on severity. In many cases, employees cannot return to the same job while recovering from shoulder injury, and sometimes they are permanently unable to return to the field. This is devastating not only to the affected employees, but also employers. There are too many specific automated devices in existence to list individually, but we can look at some broad solutions to the overworked shoulder.

Reducing overhead work: mechanized and automated equipment that can adjust to the height of the person using it significantly minimizes the need to reach. This may be a stationary unit that moves up and down or part of a pulley system that also transports product. In some cases, an overhead crane or lifting system is appropriate to eliminate any manual movement of an object. Reaching is a major factor in work-related shoulder MSDs.
Minimizing repetition: repetitive movements - great or small - severely impact the health of a joint. Anything that replaces the job of manual repetitive motion will be an asset to a company whether it's a conveyor belt or a dipping machine.
Pushing and pulling modifications: most people equate injuries from pushing or pulling with the back. While this is true, the shoulder is also used in pushing and pulling. Ideally, carts (and the like) are motorized to eliminate pushing and pulling all together. This is the safest solution for the entire body. For transportation equipment that isn't motorized, having handles that adjust to the pusher's height is very important. Carts can also be designed to be loaded and unloaded with minimal bending, lifting, and twisting. These actions are also very stressful to both the back and the shoulders.

While these are just three categories of improvement, the number of machines, equipment, and devices built with those factors in mind is enormous. They're built because they're not only needed, but they're also effective. Whatever your industry, there are products designed to help minimize undue stress and injury to your body.

Carol Olin is Vice President of Americarts USA, a manufacturer of US-made motorized platform carts used for hospital transporting, hospitality and industrial. AmeriCart USA features high quality carts price to compete with imported products. Carol has been in the material transport equipment industry for over 11 years.


Original article